an echo of things to come

The Bride He Cast Away on Their Wedding Night

PageProfit Studio

In the glittering world of high society and cutthroat ambition, a single sentence shatters a marriage: "Let's get a divorce." For three years, Claire Thompson has lived in exile, her marriage to the powerful Nelson Cooper a hollow shell existing only on paper. Shipped abroad on her wedding day and utterly forgotten, she returns only to be handed divorce papers. But Claire is no longer the timid, heartbroken girl she once was. Behind her quiet facade lies a woman transformed, secretly rejoicing at her newfound freedom. However, freedom comes with a price. As Claire signs the papers with relief, a chilling phone call reveals a dark truth: the threats she faced overseas were no accident, and the trail leads shockingly close to home-to the family that raised her and the husband who discarded her. Just as she prepares to sever all ties, a twist of fate pulls her back into the gilded cage. Nelson, for reasons unknown, suddenly stalls the divorce. Meanwhile, the family that disowned her and the fragile, manipulative sister who stole her life are determined to ruin her reputation and drive her out for good. But Claire is playing a different game now. With a mysterious new identity, powerful allies, and secrets of her own, she is no one's pawn. As hidden truths unravel and loyalties are tested, a stunning question emerges: In this high-stakes battle of love, betrayal, and revenge, who is truly trapping whom?

Download the Book on the App

A strong and stable sawing trestle is one of the most important accessories of the carpenter's shop, whether amateur or professional. The saw is constantly being used, and for it to do its work accurately the material must be properly supported, so that it cannot sway or shift. Anybody who has been in the habit of using a wobbly chair or box to saw on will be surprised to find how much more easily wood can be cut when resting on a trestle like that illustrated by Figs. 1 to 3.

The top, a, of the trestle is 29 inches long, 4 inches wide, and 2 inches thick. At one end it has a deep nick, to serve much the same purpose as the notched board used in fretworking; also to hold on edge such things as doors while their edges are planed up. Pushed back against the wall the trestle is then "as good as a boy."

[Illustration: Fig I.-Leg of sawing trestle (left). Trestle seen from above (right).]

The four legs are made of 2 by 2 inch stuff. To start with, the pieces should be 24 inches long, to allow for the waste of cutting on the angle.

Cutting the Notches.-Make four marks 7 inches from the four corners of the top, set your bevel to an angle of 70 degrees (or cut an angle out of a card with the help of a protractor), and lay a leg against each mark in turn, the end projecting an inch or so above the top. Move the leg about till it makes the proper angle at the mark, and draw a pencil line down each side of the leg as close up as possible. Since the legs may vary slightly in size, use each once only for marking, and number it and the place to which it belongs.

Lines must now be drawn along the upper and under sides of the top, parallel to and 3/4-inch from the edge, to complete the marking out of the notches.

Cut just inside the side marks with a fine tenon saw, and remove the wood between the cuts back to the top and bottom marks with a broad, sharp chisel, making the surface of the cut as true and flat as you can. Then "offer" the leg that belongs to the cut, its end projecting an inch or so. If it won't enter, bevel off the sides of the cut very slightly till it will. A good driving fit is what one should aim at. While the leg is in place, draw your pencil in the angles which it makes with the top above and below, to obtain the lines AB, CD (Fig. 2, a).

Read Now